PPS-58 PRO: ACM and Aluminum Panel Extrusion System
An extrusion system for ACM and solid aluminum panels. Built for faster installs and the clean, precise facade that defines a premium finish.
PPS-58 PRO is an aluminum extrusion system for ACM and aluminum panel cladding on building exteriors. Using this system, ACM and aluminum panels are installed with consistent spacing and straight, controlled joint lines, producing a high-quality, premium, and modern facade.
PPS-58 PRO is designed, manufactured, and stocked in Canada by Profelez.
Why Fabricators Specify PPS-58 PRO
A premium facade depends on consistent joint widths across the full elevation, panel faces that sit flat and true, and crisp lines at every transition. PPS-58 PRO is engineered to deliver each of these on ACM and aluminum panel projects.
Faster Installation
A coordinated set of extrusions and clips lets each panel register cleanly against the next, reducing on-site adjustment.
A Cleaner Finished Facade
The perimeter extrusion defines a uniform joint width and the clips hold every panel to the same finished plane.
Made in Canada
Designed and manufactured in Toronto. Stocked at the Profelez facility and shipped without cross-border lead-time risk.
A Complete Component Set
Extrusions, clips, brackets, and fasteners arrive as one order, ready to fabricate against.
PPS-58 PRO is engineered for faster on-site installation, consistent panel alignment, and the clean, precise facade that defines a premium finish.
PPS-58 PRO Component System
The full system arrives as one order — extrusions, clips, brackets, and fasteners — ready to fabricate against.
Perimeter Extrusion
Frames each panel and defines the joint width along every panel edge.
J-Starter
Anchors the first course of panels and establishes the starting edge.
Clip
Secures each panel to the substructure and holds the face to a consistent plane.
Half Clip
Used at panel ends and tighter edge conditions where a full clip will not fit.
Corner Bracket
Supports folded panel corners and holds the corner geometry clean.
L-Bracket
Used at attachment points, transitions, and support conditions.
Rivets
Fasten the extrusion components to the panel during fabrication.
What PPS-58 PRO Installs
The same system covers both materials, so a fabricator running mixed-material projects does not switch attachment systems between scopes.
ACM Panels
4mm aluminum composite material with PE, FR, or A2 cores, from any major manufacturer.
Solid Aluminum Panels
Aluminum plate at standard cladding thicknesses.
Where PPS-58 PRO Is Used
PPS-58 PRO is used on ACM and aluminum panel projects where clean joints, consistent spacing, and a controlled installation layout matter.
Ordering PPS-58 PRO
⚙️ Who Buys PPS-58 PRO
PPS-58 PRO is available to ACM panel fabricators and architectural metal shops. Components are stocked at Profelez's Toronto facility, ready to ship.
📍 Where We Ship
Request PPS-58 PRO Pricing
Get pricing and lead times for your project.
Frequently Asked Questions
What is PPS-58 PRO?
PPS-58 PRO is an aluminum extrusion system for ACM and aluminum panel cladding on building exteriors. The system holds each panel with consistent spacing and straight, controlled joint lines.
What panels work with PPS-58 PRO?
PPS-58 PRO is engineered for 4mm ACM panels (PE, FR, or A2 cores) and solid aluminum plate panels.
How is PPS-58 PRO installed?
Perimeter extrusions are riveted to the panels during fabrication. On site, the panels are fastened to clips that have been pre-installed on the substrate. A full walk-through is shown in the installation video above.
What components come with PPS-58 PRO?
The system includes perimeter extrusion, J-starter, clips and half-clips, corner brackets, L-brackets, and structural rivets.
Where is PPS-58 PRO made?
PPS-58 PRO is designed and manufactured in Toronto, Canada by Profelez.
Can my fabrication shop buy PPS-58 PRO?
Yes. PPS-58 PRO is sold to ACM panel fabricators and architectural metal shops. Contact Profelez for pricing.
What is the lead time on PPS-58 PRO components?
Components are stocked at Profelez's Toronto facility. Contact Profelez for current availability.